The NSG series top products “MADE IN AUSTRIA”.
The 2-pole/4-pole generators with a generator speed of 3000 min-1/1500 min-1 are well thought out to the last detail.-1/1500 min-1 bis ins kleinste Detail durchdacht.
Fully rubberized wheels guarantee perfect use even on rough terrain. Don't worry about air loss; the wheels last forever.
The measuring devices and sockets are particularly well protected behind the red cover. In addition, the cooling exhaust air is used to cool the gearbox through the housing. The special airflow system allows 100% continuous load without overheating.
The 96 mm x 96 mm illuminated analogue measuring devices are located behind protective glass which has also been bevelled. Perfectly visible from the tractor.
Highest possible level of safety during commissioning. Innovative technology used sensibly:
The NSG series' hinged handles make it easy to transport the generator even without a tractor. It is also equipped with a PTO trolley.
For field operation:
For home operation:
The 2-pole, internally ventilated synchronous generator with 3000 min-1-1 has a compound transformer and carbon brushes (approx. 7000 operating hours) and is therefore extremely robust and straightforward. It is also possible to install a low-speed generator (22 kVA/ 30 VA). This 4-pole, also internally ventilated synchronous generator with 1500 min-1-1, is AVR-regulated and therefore the model for higher demands. The helical-cut gearbox has hardened gears that run in an oil bath. It is enclosed in a cast-iron housing to meet the highest quality standards.