NSGL Series 4-pole · 1500 min-1 with gearbox for home and field operation

Clear

NSGL SERIES FROM 30 KVA TO 160 KVA

The NSGL series – your solution up to 160 kVA.

 

The 4-pole generators with a generator speed of 1500 min-1 are mounted on a welded, hot-dip galvanized steel frame. With a maximum continuous output of 160 kVA, we can now supply any and every agricultural application with energy.
The power from 30 kVA to 160 kVA meets the highest demands in all areas.

 


Solid rubber tyres

Fully rubberized wheels guarantee perfect use even on rough terrain. Don't worry about air loss; the wheels last forever.


Hot-dip galvanized steel frame

 

The measuring devices and sockets are particularly well protected behind the red cover. In addition, the cooling exhaust air is used to cool the gearbox through the housing. The special airflow system allows 100% continuous load without overheating.

 


Illuminated measuring devices

 

The 96 mm x 96 mm illuminated analogue measuring devices are located behind protective glass which has also been bevelled. Perfectly visible from the tractor.


Control panel

 

Ensure the highest possible safety during commissioning as standard:

  • Insulation monitoring
  • Voltage monitoring
  • Frequency monitoring

*The N-bracket is only installed on devices sold in Germany.


Sockets NSGL 30 – 50

 

For field operation:

  • 2 x Schuko
  • 1 x CEE 5x16A
  • 1 x CEE 5x16A
  • 1 x CEE 5x32A
  • 1 x CEE 5x63A

For home operation:

  • 1 x CEE 5x63A 1h

 


Sockets NSGL 63 – 85

 

For field operation:

  • 2 x Schuko
  • 1 x CEE 5x16A
  • 1 x CEE 5x32A
  • 1 x CEE 5x63A
  • 1 x CEE 5x125A

For home operation:

  • 1 x CEE 5x125A 1h

 


Sockets NSGL 130 – 160

 

For field operation:

  • 2 x Schuko
  • 1 x CEE 5x16A
  • 1 x CEE 5x32A
  • 1 x CEE 5x63A
  • 1 x CEE 5x125A

For home operation:

  • 1 x 250A DS 2

 


Generator and gearbox

 

The 4-pole, internally ventilated synchronous generator with 1500 min-1 has an electronic voltage regulation (AVR) and is brushless. The AVR ensures very precise: +/-1% 400V constant voltage. It’s therefore extremely robust and durable.

The helical-cut gearbox has hardened gears that run in an oil bath. It is enclosed in a cast-iron housing to meet the highest quality standards.

Schneeberger Generatoren GmbH Gundertshausen 61 5142 Eggelsberg Tel.: +43 7748 25 43info@schneeberger.at

Schneeberger Generatoren GmbH Gundertshausen 61

5142 Eggelsberg

Tel.: +43 7748 25 43

info@schneeberger.at

en_GB